Harley-Davidson Road King 2019 Specifications

Specification	Value
Year	2019
ABS	Standard
Bore x Stroke	100 x 111 mm / 3.937 x 4.374 in
Capacity	1746 cc / 107 cub in.
Clutch	Hydraulically actuated 9 plate wet, Assist & Slip
Compression Ratio	10.0:1
Cooling System	Air cooled
Dimensions	Length 2450 mm / 96.5 in
Dry Weight	362 kg / 798 lbs
Engine	Four stroke, V-Twin, Milwaukee-Eight 107, Pushrod-operated, overhead valves with hydraulic, self-adjusting lifters, 4 valves per cylinder
Exhaust	Chrome, 2-1-2 dual exhaust with tapered mufflers
Final Drive	Belt
Frame	Mild steel; tubular frame; two-piece stamped and welded backbone; cast and forged junctions; twin downtubes; bolt-on rear frame with forged fender supports; MIG welded Swingarm Mild steel; two-piece drawn and welded section; forged junctions; MIG welded
Front Brakes	2 x 300 mm disc, caliper type 32 mm, 4-piston fixed, dual floating rotors
Front Suspension	49 mm forks, Dual Bending Valve
Front Tyre	BW 130/80B17 65H
Front Wheel	9 Impeller Cast Aluminum
Front Wheel Travel	117 mm / 4.6 in
Fuel Capacity	22.7 Litres / 6.0 US gal
Gear Ratio	1st 9.593 2nd 6.65 3rd 4.938 4th 4 5th 3.407 6th 2.875
Ground Clearance	135 mm / 5.3 in
Ignition	Single-fire, non-wasted, map-controlled spark ignition
Induction	Electronic Sequential Port Fuel Injection (ESPFI)
Lean Angle, Left	32°
Lean Angle, Right	32°
Lubrication	Pressurized, dry-sump with oil cooler
Max Torque	151 Nm / 111.4 ft/lb @ 3250 rpm
Oil Capacity	4.9 Litres / 5.2 US qts
Primary Drive	Chain, 34/46 ratio
Rake	26°
Rear Brakes	Single 300 mm, caliper type 32 mm, 4-piston, fixed rotor
Rear Suspension	Premium low height hand-adjustable rear shocks
Rear Tyre	BW 180/65B16 81H
Rear Wheel	Impeller Cast Aluminum
Rear Wheel Travel	54.6 mm / 2.15 in
Seat Height	Laden 7 668 mm / 26.3 in. Unladen 706 mm / 27.8 in.
Starting	Electric
Trail	170 mm / 6.7 in
Transmission	6 Speed
Wet Weight	379 kg / 836 lbs
Wheelbase	1625 mm / 64 in
Wheels	Black, Turbine Cast Aluminium